angryasian

Yes, I technically bought this at the end of 2016, but it's only ever been ridden in proper winter conditions, and according to my Strava records, this bike has less than 300 miles on it -- total! It's been a fantastic bike, but it's just time for a change. The narrow Q-factor is a genuine game changer for fat bikes, it's light, it has plenty of tire clearance (currently maxed out in the back at 26x4.6"), and it's in fantastic shape. Custom wheels with Sun-Ringle Mulefut 80 rims, Wheelsmith butted stainless steel spokes, and Industry Nine Torch 3° hubs. Barely a scratch on it and ready to run. One spec note from the images: this bike will come with 175 mm-long Race Face Turbine aluminum fat bike cranks, NOT the Next SL carbon ones shown here. BUT, the made-for-Otso Revelate frame bag is included (almost no straps!). Total weight as shown is 12.33 kg (27.2 lb), so it'll be a hair heavier with the aluminum cranks on there. Buyer pays shipping. Frameset: Otso Voytek, size medium Headset: FSA Stem: Easton Haven, 70 mm Handlebars: Easton Haven Carbon Tape/grips: Bontrager lock-on Front brake: SRAM Guide RSC, 180 mm rotor Rear brake: SRAM Guide RSC, 160 mm rotor Brake levers: SRAM Guide RSC (with updated internals) Rear derailleur: SRAM XX1 Shift levers: SRAM XX1 trigger Cassette: SRAM XG-1150 11-speed, 10-42T Chain: SRAM XX1 Crankset: Race Face Turbine Cinch w/ 30T Wolf Tooth CAMO oval chainring Bottom bracket: Race Face Rims: Sun-Ringle Mulefut 80 Front hub: Industry Nine Torch, 150x15 mm Rear hub: Industry Nine Torch, 177x12 mm Spokes: Wheelsmith butted Front tire: 45NRTH Flowbeist, 26x4.6", tubeless Rear tire: 45NRTH Dunderbeist, 26x4.6", tubeless Saddle: Specialized Henge Expert, 143 mm Seatpost: Thomson Elite

SRAM XO1 Eagle 12-speed crankset for sale with 175 mm carbon fiber arms, 32T direct-mount Boost chainring, DUB aluminum spindle. Cranks have a handful of scrapes on them, but nothing super worrisome as far as I can tell, and they've always been ridden with crank boots and protective vinyl tape. Drivetrain has always been run with wax lube and kept immaculately maintained, so the chainring still has plenty of life left in it. No bottom bracket included. Buyer pays shipping.

WTB Volt saddle with hollow chromoly rails in custom Yeti colors that came stock on my wife's SB130. I think she rode it once, so it's basically like new. Barely a mark on it at all. Buyer pays shipping.

Shimano Deore XT M8130 crankset for sale, with the longer spindle required for 157 mm SuperBoost frames. 175 mm-long arms, 30T chainring. Bought this NIB for my wife's new bike, but she decided she wanted to switch to 170 mm arms. Arms are in like-new condition with the exception of one or two of the slightest scuffs (see pics), chainring barely has the anodization worn off. Her chain did drop to the inside once, though, so there's a little scuffing on the inside of the spider, but it's totally unnoticeable when mounted. Factory protective vinyl tape still installed. Bottom bracket is NOT included. Buyer pays shipping.

DT Swiss XM 1501 Spline 30 29er wheels with 30 mm-wide tubeless aluminum rims, DT Swiss 240s hubs, and 36-tooth Star Ratchet internals with SRAM XD driver body. These came stock on my wife's 2020 Yeti SB130, but they've been sitting since she got her new bike a few months ago. Wheels are perfectly straight and true, though there are a few scratches and scuffs (sorry, lots of rocks here in Colorado). Rear hub bearings are nice and smooth, front ones are slightly crunchy but still work totally fine. Six-bolt rotor interface, Boost front and rear axle spacing. Tubeless valve stems are included, but rims should probably be re-wrapped with fresh tubeless tape. Buyer pays shipping.

2020 Fox 36 Float Factory Fit 4 suspension fork for sale, currently set up with 160 mm travel for 29" wheels. 44 mm offset, 175 mm-long 1 1/8-to-1 1/2" tapered aluminum steerer with pre-installed star nut. Some scratches on the lowers, but mostly on the Uplnd Stoke protective vinyl. Fresh oil bath and recent air spring service, and the bushings and wipers are in great shape. Buttery smooth! Probably due for a damper overhaul, though (works great, but it's just time). 2.1 kg actual weight (with 15x110 mm Boost thru-axle). Buyer pays shipping.

2020 Yeti SB130 Turq LR "Lunch Ride" frame for sale (137 mm rear wheel travel). Size medium in "spruce". Great condition overall. It's a Colorado bike so there are definitely some scratches and scuffs here and there (see pics), but it's had a complete Upland Stoke protective tape kit from day one so most of what you see is limited to the tape, and it's seen very little mud or water. Fox DPX2 rear shock, all bearings are in excellent shape. Cane Creek headset included (SRAM DUB bottom bracket will be removed before shipping). US buyers only, buyer pays shipping.